Licenses/Permits > Permitting > Reports > Inspection Report

Recent Changes:  
6.236 - Fixed an issue where the report would not print when a specific permit note was selected in the drop-down; Updated the report format to minimum UX standards  

6.157 - Added unit number to the property street address if the 'Use unit number in address' setting is set in the Permitting system file

Introduction

The inspection report lists permits with an inspection status, type of inspection and the inspector. This report can be printed for one specific status and/or one specific type of inspection, or for all.

Explanation

Report Selections Tab

  • Report sequence

    • Contractor
    • Inspection Group
    • Inspector
    • Owner
    • Permit Class
    • Permit Number(default)
    • Type of inspection

  • Selection criteria

Filters

  • Permit Numbers
  • Date Inspected
  • Property address - Street number/Name
  • Unit
  • Status
  • (Permit) Note field to print
  • Include total sq ft

Report Options

  • Print inspection notes
  • Print square footage
  • Print inspection request form - enabled only when the sequence is permit number, the 'new page for each sequence' option is checked, and the status is S (scheduled).
  • Print reason for permit/description of work
  • New page for each sequence

Data Selections Tab

Filter information further by the following categories:

  • Permit class
  • Inspectors
  • Inspection group
  • Status