SmartFusion Modules > Utility Billing > Enter/Edit UB Customer Locations Tab > Meter(s)

Recent Changes:  
6.172
- Removed an option to allow a customer to enter negative usage. All readings entered that are lower than the last reading will be treated as rollover readings.

6.121
- Added an alert if the status of a meter was changed in the Finalize Wizard to indicate that the meter status will be changed after billing.
6.86
- Added the functionality that if the rate type on the meter is not demand the demand reading field will be disabled.

6.65
- Added the functionality that allows one to view the meter in Enter/Edit Meters after double clicking a meter serial in the grid.

6.59
- If a reading is entered that is less than the previous reading (same number of digits), users will be allowed to specify if the usage is truly negative or if a roll over should be performed.

6.39
- If Last Billed Reading and Previous Read Date are enabled then user entries for these fields will be saved as "Is Billed"

Introduction

Use this pop-up screen to manage meters for a location.

Explanation

Selection Criteria

Add/Delete Meter
Last Billed Reading - disabled unless there is no previous billed reading
Previous Read Date - disabled unless there is no previous billed reading
Curr Unbilled Reading
Curr Read Date
Demand Reading
Curr Usage - disabled (calculated field)
Average Usage - disabled (calculated field)
Std Usage
Std Other Charge
Curr Other Charge
Budget Billing Amt - disabled
Status - disabled; there is a button to the right to access Change Meter Status
Services - disabled
Rate Type - disabled
Multiplier - disabled
Number of Dials - disabled
ERT - disabled
Read Sequence
Read Type
Combine Usage
Estimate Reading
Include Meter History - display inactive meters